Collection

10-32 Rubber well nut. Flanged neoprene bushings with embedded brass threaded inserts. They allow you to blindly fasten acesories when there is no inside access. Install well nuts so flange is flush with surface. Tighten firmly to form water tight seal.

Speargun with barrel made by a special aeronautical aluminium alloy of high mechanical performance, protected by an anodization process at high thickness. The integrated shaft guide is dissected towards the muzzle to improve the moving. The trigger run ca

The RIFFE Teak Competitor Wood Speargun Series is designed for both entry level spearfishing and advanced divers. Most suitable for hunting around reefs, holes, and bottom diving. RIFFE Models C3S and C3XS have blue water hunting capabilities with proper

Works like a small pop-up tent. Loops of bungee connect to the boat via small fittings installed along the rails. The entire dodger folds forward to enter or exit the kayak, to make pedal adjustments or reach items in the cockpit. An access panel is built

Hobie’s original Pro Angler packs extreme fishing utility, with scads of (that’s six) horizontal rod lockers, enough tackle compartments to empty a store, and an elevated Vantage ST seat that’s as much easy chair as captain’s perch.

There’s a non-skid de

Hobie Shock Cord Hook for 5/16” shockcord

Hobie MirageDrive Stainless Steel Sprocket

This Hobie trailer cradle set is specifically designed to support the Outback Kayak 2019+. The Outback Kayak’s hull slides right into the cradle and get full support.

Hobie® trailer cradles are perfect for those wanting to transport their kayak uprigh

Speargun with barrel made by a special aeronautical aluminium alloy of high mechanical performance, protected by an anodization process at high thickness. The integrated shaft guide is dissected towards the muzzle to improve the moving. The trigger run ca

The Garmin GT52 ready transducer mount is designed to fit in the existing Lowrance Ready location on the base of Hobie kayaks. These mount and cover the GT52 transducer which comes with the Garmin Striker range providing protection and also maintaining a

Two pieces wetsuit, neoprene open cell inside with elastic N.A.T. camouflage lining outside. Preformed cut. • Available back NAT camu • Adjustable button closing • Strong PUFFGUM reinforcements on elbows and knees

Hobie MirageDrive Left Pedal/Crank Assembly, Gray

Hobie Hat, Classic Hobie Surf, Navy

These rack pads fit the flat, wide crossbars that come factory installed on many vehicles. Made with fade-proof, stain-proof solution dyed acryllic fabric. Elastic cord ties on the ends and velcro fasteners to keep the center tightly closed.

Make your Hobie kayak ride more comfortable with adjustable seat cushioning. Replaces the standard foam seat pad for Hobie Mirage kayaks. Adjust the cushion by adding or releasing air pressure (like an inflatble sleeping bag pad.) Has an internal self inf

Great added stability for use when sailing, fishing, standing when site fishing, diving or shooting photos! SideKick ama kit is simple, light weight and effective! Floats are inflatable.

The SideKick’s cross arms adjust the float height with a simple “cl

Hobie Gusseted Stow Bag 6” x 12”. Securely stow tools, gloves or small parts for easy access. Gusseted bags have hooks on both ends to clip to your boat.

These visors were designed to reduce the glare and the water off your fish finder screen. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash

The TripleShot ready transducer mount is designed to fit in the existing Lowrance Ready location on the base of Hobie kayaks. These mount and cover the TripleShot transducer which comes with the Lowrance Hook 2 range providing protection and also maintain

The Raymarine Ready transducer mounts are designed to fit in the existing Lowrance Ready location on the base of Hobie Kayaks. These clamp the Dragonfly transducer onto the mounting plate giving it no chance of falling sideways.

This is made from sturdy

The Humminbird ONIX ready transducer mount is designed to fit in the existing Lowrance Ready location on the base of Hobie kayaks. This allows your side imaging to work clearly and the cover provides protection to the transducer.

This mount fits the foll

Features a thin foam back design … perfect for use with Hobie Vantage seats. This thinner back profile provides more mobility and comfort, while reducing interference with taller seat backs. New “Graded Sizing” gives a better fit for a different body siz

This Hobie trailer cradle set is specifically designed to support the Pro Angler 17. The pro angler17’s hull slides right into the cradle and get full support.

Hobie Burnt Orange Pull-over Hoodie, Unisex, Hobie Script Logo,